MEDIFLOW™ Medical Grade Copper Pipe & Fittings manufacturer From India, Get Price Now.
We have been at present working #covid-19, Emergency Hospital Needs, Supply them Medical Copper Pipe to meet the dynamic demands of the hospital industry. We consistently strive to deliver customized solutions through comprehensive Quality and Justifying Needs of Medical Gas Pipeline Installation. Our product range includes Medical grade Copper Pipe and Medical Grade Copper Pipe Fitting. We have access to latest technology and a team of employees with vast industry expertise. We have also installed various designing software for increasing the efficiency and output of our organization. We endeavor to provide our clients with the most innovative and superior quality products.
At Metal Alloys Corporation Brand: MEDIFLOW™ we proudly manufacture MEDIFLOW™ marked Medical Grade Copper Pipe used in Medical Gas Distribution system. Uninterrupted Medical Gas supply is a necessity in hospitals (ICCU, Operation Theater, Wards, and Nursery etc.) Pipes facilitate this in most effective manner.
MEDIFLOW™ marked medical grade copper tubes are manufactured as per
EN 13348 / BS EN 1057 specifications. The pipes are manufacturer under thorough inspections and quality control measures.
MEDIFLOW™ marked medical grade copper tubes are available in size range 6mm to 108mm OD, 0.6mm to 2.0mm wall thickness in Half Hard/Hard condition and length 3 meter, 5 meter, 5.5 meter, 6 meter or as per requirement.
MEDIFLOW™ Copper pipes are subjected to TPI by reputed agencies like Lloyds Register, SGS, and TUV as per customer demand.
Thickness(mm) | 0.6 mm to 2.0 mm |
Size/Diameter | 6mm to 108 mm |
Application | Gas Handling |
Single Piece Length | 3 meter | 5 meter | 5.5 meter | 6 meter |
Tensile Strength | 220 Mpa |
Standards | EN 13348 / BS EN 1057 |
MEDIFLOW™ Medical Grade Copper Pipe Cost Per Meter Would Be Considering as Range between Rs. 490 to 550 Per KG,
Medical Grade Copper Pipe Per Meter Weight As below,
Sr
No |
Pipe
OD mm |
Wall
Thickness mm |
Temper | Length | Weight
Per Meter |
1 | 10 | 0.6 | Half Hard | 3 mtr | 5.5 mtr | 5.8 mtr | 6 mtr | 0.158 |
2 | 12 | 0.7 | Half Hard | 3 mtr | 5.5 mtr | 5.8 mtr | 6 mtr | 0.222 |
3 | 15 | 0.9 | Half Hard | 3 mtr | 5.5 mtr | 5.8 mtr | 6 mtr | 0.356 |
4 | 22 | 0.9 | Half Hard | 3 mtr | 5.5 mtr | 5.8 mtr | 6 mtr | 0.533 |
5 | 28 | 0.9 | Half Hard | 3 mtr | 5.5 mtr | 5.8 mtr | 6 mtr | 0.685 |
6 | 35 | 1.2 | Half Hard | 3 mtr | 5.5 mtr | 5.8 mtr | 6 mtr | 1.139 |
7 | 42 | 1.2 | Half Hard | 3 mtr | 5.5 mtr | 5.8 mtr | 6 mtr | 1.375 |
8 | 54 | 1.2 | Half Hard | 3 mtr | 5.5 mtr | 5.8 mtr | 6 mtr | 1.780 |
9 | 67 | 1.2 | Half Hard | 3 mtr | 5.5 mtr | 5.8 mtr | 6 mtr | 1.850 |
10 | 76 | 1.5 | Half Hard | 3 mtr | 5.5 mtr | 5.8 mtr | 6 mtr | 2.096 |
11 | 108 | 1.5 | Half Hard | 3 mtr | 5.5 mtr | 5.8 mtr | 6 mtr | 2.992 |
Here, For Medical Grade Copper Pipe Per Meter Weight Calculations as below,
Total Meter * Size of the pipe as chart above (Consider Weight Per Meter) = Total Weight in KG
Total Weight KG * Price (Range Rs. 490 to 550) = Final Price
Price Depends on LME * BME – Present Price – Rs. 490 To 550
Medical Gas Piping Certification <- Click to review, Lloyd Certified, ISO Certified, Trade Mark.
MEDIFLOW™ plz check Medical Grade Copper Pipe PDF (Click PDF Download) for Medical Gas Pipeline System Design Guide
Underground Oxygen Copper Piping
Safety standards for oxygen and other positive-pressure medical gases require the use of (see EN 13348 Medical Gas Copper Pipe ). Special cleanliness requirements are called for because oxygen under pressure may cause the spontaneous combustion of some organic oils (the residual of lubricating oil used during manufacture) and for the safety of patients receiving medical gases.
Copper tube for medical gas lines is furnished by the manufacturers suitably cleaned and capped or plugged. Care must be taken to prevent contamination of the system when the caps or plugs are removed and tube is installed. The installer must satisfy himself and the inspection department that the cleanliness requirements of the code have been met.
Installation and Testing of Medical Gas Piping Systems
All piping, valves, fittings and other components for use in all non-flammable medical gas systems must be thoroughly cleaned by the manufacturer to remove oil, grease and other readily oxidization materials as if they were being prepared for oxygen service. Use particular care in storage and handling. Such material must be capped or plugged to prevent re-contamination before final assembly. Just prior to final assembly, the material must be examined internally for contamination.
Cleaning must be done in accordance with the provisions of CGA Pamphlet,
Before a system is used the appropriate persons must certify in writing that the tests and procedures required in paragraphs 15.12 & 15.13 of HTM have been completed and that all systems comply with the requirements. This must include certification that all drawings and manuals required by the contract have been supplied and “as-fitted” drawings are correct.
1.1. The tests to be carried out at each stage of the installation programme are set out in the relevant HTM together with requirements for personnel, instrumentation and documentation required.
1.2. The HTM provides 30 specimen forms which should be used for the sequential verification of the system development – refer Associated Documents.
1.3. Bespoke forms combining the requirements of the HTM may be used providing the sequence and content of test information is retained. The use of such a form will require the approval of the BOPDHB Authorised Person prior to use.
1.4. The BOPDHB has developed a checklist charting test responsibilities as a reference tool.
1.5. BOPDHB – Property Services – MGPS Testing & Responsibility Schedule.
1.6. Regular reference to this checklist during project execution will promote best practise.
1.7. When the project milestones arise, as each test document is completed and verified, copies of the completed form must be handed immediately to the BOPDHB Authorised Person and the Responsible Officer. This will ensure in the closing. stages of the project that a well constructed set of documentation has been retained to allow confident completion of the HTM “Summary of Tests form” BO.
We Metal Alloys Corporation Always Considering Our Buyer 100% Satisfaction For Product Quality, We Provide One Stop Sourcing for Medical Grade Copper Pipe and Fittings, with MEDIFLOW™ Brand.
Follow us on Linkedin : https://www.linkedin.com/company/metal-alloys-corporation-jamnagar